Get in Touch

Atlanta, GA – Regus at Colony Squar

1201 Peachtree Street NE, Suite 200, Atlanta, United States, 30361

The venue is centrally located in Midtown Atlanta within the prominent Colony Square complex at 1201 Peachtree Street NE, easily accessed by car via I‑75/85 or GA‑400, with several parking garages nearby. From Hartsfield–Jackson Atlanta International Airport (ATL), around 15 miles south, a taxi or rideshare typically takes 20–30 minutes north along I‑75/85 N. Public transit users can take MARTA Rail to the Arts Center or Midtown stations (0.3–0.5 miles away) and walk easily, and numerous MARTA bus routes along Peachtree Street stop directly outside the entrance.

Atlanta, GA – The Proscenium

1170 Peachtree Street NE, Atlanta, United States, 30309

The venue is located in the heart of Midtown Atlanta in the Proscenium high–rise at 1170 Peachtree Street NE, easily accessible by car via I‑75/85 and GA‑400 with several parking garages nearby. Visitors arriving from Hartsfield–Jackson Atlanta International Airport (ATL), about 15 miles south, can expect a taxi or rideshare ride taking 20–30 minutes via I‑75/85 North. Public transit is seamless with MARTA Rail service; the Arts Center and Midtown stations are within walking distance (approximately 0.3–0.4 miles), and multiple MARTA bus routes also serve Peachtree Street.

Decatur, GA – Regus at One West Court Square

One West Court Square, Suite 750, Decatur, United States, 30030

The venue is located in the heart of downtown Decatur within One West Court Square, easily reached by car via I‑20 and I‑285, with several public parking decks directly adjacent. Travelers from Hartsfield–Jackson Atlanta International Airport (ATL), approximately 17 miles southwest, can expect a taxi or rideshare ride of around 25–30 minutes via I‑20 East. Public transit is particularly convenient: MARTA rail users can disembark at Decatur Station (about 0.15 miles away) and walk a few minutes to the building entrance. Local bus routes also serve Trinity Place and Swanton Way, putting the center within easy reach.

Atlanta, GA – Regus at One Hartsfield

100 Hartsfield Centre Parkway, Suite 500, Atlanta, United States, 30354

The venue is located in the One Hartsfield Center office building, adjacent to Hartsfield–Jackson Atlanta International Airport, easily reached by car via I‑75/I‑85 or GA‑138, with abundant on-site parking. Visitors arriving from ATL airport can walk or take a shuttle to the building, or opt for a quick 2–3‑minute taxi or rideshare ride. Public transit users can board MARTA from the Airport Station and ride one stop to College Park Station, then catch a connecting shuttle or enjoy a brief walk of about half a mile.

Atlanta, GA – Regus at Peachtree

260 Peachtree Street NW, Suite 2200, Atlanta, United States, 30303

The venue is situated in the iconic Coastal States Building at 260 Peachtree Street in downtown Atlanta, accessible by car via I‑75/85 or I‑20 with convenient parking garages nearby. From Hartsfield–Jackson Atlanta International Airport (ATL), about 12 miles south, a taxi or rideshare along I‑75/85 North takes approximately 15–20 minutes. For public transit, MARTA rail users can disembark at Five Points Station and walk 0.5 miles northeast, or exit at Peachtree Center Station and walk two blocks north—both routes offering easy access.

Augusta, GA – At Broad Street

823 Broad Street, Augusta, United States, 3090

The venue is located in the heart of downtown Augusta on Broad Street, easily accessible by car via I‑20 with several public parking garages nearby. From Augusta Regional Airport (AGS), about 9 miles west, taxis or rideshares typically take 15–20 minutes via I‑20. Public transit is available through Augusta Public Transit buses with routes along Broad Street, stopping within a few blocks of the venue, offering a convenient option for attendees without a car.

Savannah, GA – Regus at Bull Street

100 Bull St Downtown, Suite 200, Savannah, United States, 31401

The venue is located in the historic downtown area on Bull Street in the Altmayer Building, easily accessible by car via I‑16 and U.S. 17, with several public garages nearby. From Savannah/Hilton Head International Airport (SAV), about 12 miles west, taxis or rideshares typically take 15–20 minutes via U.S. 17 South. Public transit is available via Chatham Area Transit (CAT) buses, with frequent service along Bull and Broughton Streets; Johnson Square Station is just a couple minutes’ walk from the venue.

Subcategories (3)

SketchUp

SketchUp
CATIA

CATIA
SolidWorks

SolidWorks

Explore Our Courses

Mastering ArchiCAD — Advanced Modeling, Collaboration, and BIM Workflows

 35 Hours

ArchiCAD is a professional Building Information Modeling (BIM) software developed by Graphisoft, widely used for architectural design, documentation, and collaboration.

This instructor-led, live training (online or onsite) is aimed at intermediate-level to advanced-level architecture and BIM professionals who wish to master complex modeling techniques, automate workflows, and enhance collaboration using ArchiCAD’s advanced features.

By the end of this training, participants will be able to:

  • Use ArchiCAD’s advanced modeling and documentation tools efficiently.
  • Customize templates, attributes, and standards for large-scale projects.
  • Leverage teamwork, BIMcloud, and IFC workflows for multi-user collaboration.
  • Integrate automation, visualization, and performance optimization tools in ArchiCAD.

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

AutoCAD Plant 3D: Advanced Design & Interference Management

 14 Hours

AutoCAD Plant 3D is a specialized CAD application for designing process plant facilities, providing tools for piping, equipment, and structural modelling as well as isometric and orthographic deliverables.

This instructor-led, live training (online or onsite) is aimed at intermediate-level to advanced-level CAD professionals who wish to create customized libraries and templates, integrate mechanical and structural elements, and implement advanced interference checking and conflict resolution workflows.

By the end of this training, participants will be able to:

  • Create and maintain customized templates for parts, equipment, and repetitive activities.
  • Modify and extend component libraries to meet project standards and workflows.
  • Produce isometric and orthogonal drawings and optimize templates for repetitive tasks.
  • Perform advanced interference checking and document conflicts and resolutions.

Format of the Course

  • Interactive lecture and demonstration.
  • Hands-on exercises in a lab environment using real project files.
  • Practical workshops focused on templates, library editing, and clash management.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

Mastering ArchiCAD

 35 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at intermediate-level architects who wish to use ArchiCAD for architectural design, building information modeling (BIM), and advanced construction documentation.

By the end of this training, participants will be able to:

  • Learn to create, modify, and manage both 2D and 3D views within projects.
  • Understand and manipulate objects, components, and libraries in ArchiCAD.
  • Create detailed building sections, elevations, and component details.
  • Analyze and optimize building energy performance using ArchiCAD’s energy analysis tools.
  • Develop photorealistic renderings and animations for presentations.
  • Automate building processes and run performance simulations.
Read more...

SolidWorks: Intermediate to Advanced

 21 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at intermediate-level to advanced-level SolidWorks users who wish to deepen their modeling skills, master advanced features, and improve design efficiency and accuracy.

By the end of this training, participants will be able to:

  • Create complex parts, assemblies, and configurations efficiently.
  • Use advanced modeling tools such as sweeps, lofts, and surfaces.
  • Apply design tables, equations, and parametric controls.
  • Perform simulations and motion studies to validate designs.
Read more...

AutoCAD Electrical

 21 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at beginner-level electrical engineers and designers who wish to use AutoCAD to create professional electrical drawings and documentation.

By the end of this training, participants will be able to:

  • Understand the basics of electrical design and drafting using AutoCAD Electrical.
  • Learn to create and manage electrical schematics, panel layouts, and wiring diagrams.
  • Utilize AutoCAD Electrical's advanced tools and features to enhance productivity.
  • Apply best practices for electrical design and documentation.
Read more...

Introduction to Solidworks PDM

 35 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at beginner-level users who wish to explore the core functionalities of Solidworks PDM and its applicability to their organization's design file management requirements.

By the end of this training, participants will be able to:

  • Understand the key features and benefits of Solidworks PDM.
  • Navigate the Solidworks PDM interface and workflows.
  • Perform basic end-user tasks such as file check-in/check-out, versioning, and searching.
  • Explore administrative functionalities, including vault configuration, user permissions, and workflow customization.
  • Assess the potential implementation of Solidworks PDM across multiple company sites.
Read more...

Solidworks for Industrial Automation

 35 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at intermediate-level mechanical engineers and CAD designers who wish to use SolidWorks to design and implement industrial automation systems.

By the end of this training, participants will be able to:

  • Install and configure SolidWorks for automation design.
  • Design, simulate, and analyze industrial automation components and systems.
  • Export designs for real-world implementation in industrial settings.
Read more...

Advanced AutoCAD Plant 3D

 21 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at advanced-level AutoCAD Plant 3D users who wish to use AutoCAD Plant 3D for complex plant design projects effectively.

By the end of this training, participants will be able to:

  • Use AutoCAD Plant 3D for complex and detailed plant design projects.
  • Understand the advanced features of AutoCAD Plant 3D, including custom component creation, advanced data management, and complex routing.
  • Manage large-scale projects and collaborate effectively with teams using different software tools.
  • Customize the software and automate repetitive tasks to meet specific project needs.
Read more...

AutoCAD Plant 3D

 14 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at beginner-level to intermediate-level professionals in plant design and engineering who wish to gain and enhance their skills in using AutoCAD Plant 3D.

By the end of this training, participants will be able to:

  • Set up a development environment that includes AutoCAD Plant 3D.
  • Create detailed 3D plant models and layouts.
  • Generate accurate isometric and orthographic drawings.
  • Effectively document and collaborate on plant designs.
  • Debug common issues in AutoCAD Plant 3D.
Read more...

Advanced SolidWorks - 5 Days

 35 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at intermediate-level to advanced-level mechatronics, mechanical, electrical, and electronics engineers who wish to further enhance their SolidWorks knowledge by mastering advanced part modeling, as well as other advanced features and shaping capabilities of SolidWorks.

By the end of this training, participants will be able to:

  • Use multi-body solids, sweeping and lofting features, and more advanced SolidWorks features.
  • Utilize the assembly modeling capabilities of SolidWorks.
  • Master the advanced modeling features of SolidWorks.
Read more...

Introduction to Autodesk 3ds Max

 14 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at beginner-level graphic designers and artists who wish to learn the basics of 3ds Max and how to create 3D models, animations, and renderings for various purposes.

By the end of this training, participants will be able to:

  • Set up a development environment that includes 3ds Max software, a computer that meets the system requirements, and Visual Studio Code.
  • Create a basic 3ds Max project and explore the user interface and navigation tools.
  • Use 3ds Max tools and modifiers to create and edit 3D objects, such as primitives, shapes, meshes, and splines.
  • Use 3ds Max materials and maps to apply colors, textures, and effects to 3D objects.
  • Use 3ds Max lights and cameras to set up the scene and adjust the lighting and perspective.
  • Use 3ds Max animation tools and controllers to animate 3D objects and create keyframes, curves, and trajectories.
  • Use 3ds Max rendering tools and settings to render the scene and export the final image or video.
Read more...

Advanced SolidWorks

 28 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at intermediate-level to advanced-level mechatronics, mechanical, electrical, and electronics engineers who wish to further enhance their SolidWorks knowledge by mastering advanced part modeling, as well as other advanced features and shaping capabilities of SolidWorks.

By the end of this training, participants will be able to:

  • Use multi-body solids, sweeping and lofting features, and more advanced SolidWorks features.
  • Utilize the assembly modeling capabilities of SolidWorks.
  • Master the advanced modeling features of SolidWorks.
Read more...

Advanced AutoCAD

 14 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at advanced-level web designers who wish to learn how to handle heavy drawings using AutoCAD.

By the end of this training, participants will be able to:

  • Understand the challenges associated with large drawings and implement strategies for efficient file organization.
  • Apply techniques to improve drawing performance and handle regenerations efficiently.
Read more...

CATIA V5 Fundamentals

 14 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at beginner-level to intermediate-level web designers who wish to learn how to use CATIA V5 for collaborative product creation and product data management.

By the end of this training, participants will be able to:

  • Understand the CATIA V5 interface and navigation.
  • Create 2D sketches and transform them into 3D models.
  • Develop assemblies to combine multiple components.
Read more...

iPad SketchUp Pro for Interior Design and Spatial Modeling

 14 Hours

SketchUp Pro is a 3D modeling software used for architectural, interior design, and product visualization that enables users to create, modify, and present detailed spatial models efficiently.

This instructor-led, live training (online or onsite) is aimed at intermediate-level interior designers and design professionals who wish to master SketchUp Pro for iPad to create, visualize, and refine interior design concepts such as rooms, furniture, and layout compositions.

Upon completion of this training, participants will be able to:

  • Set up and navigate SketchUp Pro on iPad efficiently.
  • Create and modify interior models including walls, furniture, and spatial layouts.
  • Apply textures, materials, and lighting for realistic visualizations.
  • Export and share models for presentation and collaboration.

Format of the Course

  • Interactive lecture and guided demonstrations.
  • Hands-on exercises and modeling practice on iPad.
  • Live project work with feedback and Q&A sessions.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

SolidWorks

 14 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at mechatronics, mechanical, electrical, and electronics engineers who wish to use SolidWorks to sketch and produce a detailed drawing of their ideas and concepts.

By the end of this training, participants will be able to:

  • Understand the fundamentals of SolidWorks.
  • Design and create parts, assemblies, and 3D models with SolidWorks.
Read more...

AutoCAD: Beginner to Advanced

 21 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at web designers who wish to create precise 2D models using AutoCAD.

By the end of this training, participants will be able to:

  • Create and update AutoCAD drawings, plans, and layouts.
  • Manage various style dimensions for advanced styling.
  • Master the Cartesian coordinate system to create meaningful and dynamic input.
Read more...

FreeCad: Getting Started with Parametric Modeling

 21 Hours
Join this hands-on training in Georgia to master FreeCAD, an open-source parametric 3D modeler. Learn to design real-world objects for construction or 3D printing, export to formats like STEP and STL, and automate workflows with Python. Perfect for designers and engineers.
Read more...

MBSE with Automation

 40 Hours

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training covers the fundamentals of creating templates and generating reports within the MagicDraw/Cameo tool suite, and teaches how macros and scripts work inside MagicDraw and what they can be applied to.

Read more...

MBSE with Model Analysis

 40 Hours

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training teaches the core concepts and features of validation rules, validation suites, and model metrics and is designed to introduce the core concepts and features of developing and utilizing model queries in MagicDraw/Cameo.​

Read more...

SketchUp for Architecture

 14 Hours

This instructor-led, live training in Georgia (online or onsite) is aimed at architects who wish to create 3D models for architectural designs using SketchUp.

By the end of this training, participants will be able to:

  • Use SketchUp to create 3D models of buildings, landscapes, scenes, furniture, etc.
  • Apply different types of materials to the interior and exterior of a 3D structure.
  • Geolocate a modeled structure for mapping realistic elements, such as shadows.
Read more...

Last Updated:

Testimonials (2)

Understanding how to interact with the software efficiently. There were many times I would initially go a certain way about completing a drawing, and then Jai would show me an easier or more efficient method.

Ben Milligan

Course - AutoCAD: Beginner to Advanced

The practices and the fact that you can share your screen for guidance from the trainer

Ramon Vann Cleff - DOST - Advanced Science and Technology Institute

Course - SolidWorks

Upcoming Courses

Introduction to Solidworks PDM

2026-10-22 9:30 am
35 hours
Decatur, GA – Regus at One West Court Square
$ 6757 (Online)
$ 9757 (Classroom)

CATIA V5 Fundamentals

2026-11-05 9:30 am
14 hours
Decatur, GA – Regus at One West Court Square
$ 2703 (Online)
$ 3903 (Classroom)

AutoCAD Electrical

2026-11-19 9:30 am
21 hours
Decatur, GA – Regus at One West Court Square
$ 4054 (Online)
$ 5854 (Classroom)

Introduction to Autodesk 3ds Max

2026-12-03 9:30 am
14 hours
Decatur, GA – Regus at One West Court Square
$ 2703 (Online)
$ 3903 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

CAD Consulting
Online CAD (Computer-Aided Design) training in Georgia, Computer-Aided Design (CAD) training courses in Georgia, Weekend CAD courses in Georgia, Evening CAD (Computer-Aided Design) training in Georgia, CAD instructor-led in Georgia, Computer-Aided Design instructor-led in Georgia, Computer-Aided Design classes in Georgia, Computer-Aided Design (CAD) instructor in Georgia, Weekend CAD (Computer-Aided Design) training in Georgia, CAD on-site in Georgia, Computer-Aided Design (CAD) boot camp in Georgia, CAD private courses in Georgia, Computer-Aided Design (CAD) coaching in Georgia, Computer-Aided Design (CAD) one on one training in Georgia, Online CAD training in Georgia, Evening CAD (Computer-Aided Design) courses in Georgia, CAD (Computer-Aided Design) trainer in Georgia